-
-
-
-
The WaReg Flow Regulator suits most applications and it is available from DN75 - DN400 for flow from 2 l/sec to 200 l/sec. WaReg models up to DN250 are tested for flow by us at Wapro to ensure the correct flow rate is set before delivery. The flow rate can be adjusted post-installation within a certain range. -
The AQUIKO Inline Penstock series is supplied as two standard versions: DN100-600 and DN700-1200 Areas of use: Surface water, effluent, industrial water and in the fish-farming and agricultural industries. A variety of actuation options is available i.e. manual, electric, pneumatic or hydraulic. **Method of operation sold separately.** -
AQUIKO pipe mounted flap valves have been designed and manufactured in the UK, specifically for the UK market. Our pipe mounted flap valves come as standard with a max 6MwC short term and 2MwC indefinite pressure rating. AQUIKO products also have a design life of 50 years. Our pipe mounted flap valve range has a compact design. The compact design enables the product is lightweight and easy to install. Made from HDPE which is an extremely robust material and shock absorbent. Therefore, a great choice for flap valves where they are prone to being hit by debris. The lightweight design also ensures a much lower head loss when compared to cast iron or stainless-steel alternatives. HDPE also has a low carbon footprint. -
Side Hung Doors are a simple solution, providing a fish friendly solution to flood defence. Our design delivers a strong product that is virtually maintenance free. Each AQUIKO Side Hung Door set is built to suit the exacting requirements of each enquiry. The AQUIKO Side Hung Door range is available in a wide range of sizes to suit your individual needs. Please fill in the form below to enquire. -
WaStop PushFit is designed to be installed in a shallow chamber outside the home on the outgoing sewer line. By installing the WaStop PushFit on the upstream side of the chamber the home will be instantly protected from sewer surchages and odours. Installation: In shallow chamber Size: DN110 (4”) -
WaStop RSD is designed to be installed inline on the sewer lateral. Remove a section of pipe and install the WaStop RSD valve using slide couplings to seal in place. An access cover should be placed over the site of the valve installation. Installation: Sanitary sewer lateral inside or outside the home Size: DN110 (4”) -
S-Crank for use in operating AQUIKO Penstocks -
The WaStop Inline Non Return Valve has an ingenious design. Therefore, this design ensures you are provided with the best possible protection against backflow, flooding and odour control. Sizes are available to fit most sizes of pipes up to 1800mm. However, where more bespoke fittings are required contact AQUIKO and we will be able to assist. Due to the unique way in which it works with differential pressure it works autonomously. Therefore, there is no need for human interaction or electricity. In conclusion, without the need for constant maintenance, the WaStop just works! -
At AQUIKO we understand that not every invert has a sill or step along its base. It is also frequently advantageous for a designer to have the invert of a pipe or box culvert flush with the chamber or headwall it is intersecting. The usual solution to this problem is to provide a recess for the base of a penstock to be cast into which is far from ideal as it requires additional formwork and curing time for the aggregate used to cast in the base of the penstock. AQUIKO’s solution is to supply our flush invert penstock where the bottom sealing face is a stainless-steel strip which can be anchored into the concrete invert, no casting, no formwork, no worries. AQUIKO Flush Invert Penstocks can be built to match our customers specification. Please fill in the form with your requirements and we will get back to you. -
AQUIKO Square Flap Valves offer a simple yet effective method of flood prevention. Installed in a variety of conditions to prevent backflow into outlets and minimise the risk of flooding. The flap valve comprises a door (the flap) with a hinge at the top which allows fluid to pass in one direction but not the other. The humble flap valve may seem simple yet to make a simple solution brilliant requires a lot of thought. -
The AQUIKO Channel Penstocks are available in several forms, tailored to your requirements. The penstocks are manufactured in Stainless Steel 316L, making them lightweight for ease of handling and installation, without compromising strength. The AQUIKO Channel Penstock comprises a sluice gate that seals on three sides of the channel in which is installed. Channel Penstocks are available for wall mounting, either to a single face, or to channel walls, or for rebate fixing (which requires grout). Even where grouted, installation remains a quick and simple process, using fixings supplied. Once installed, AQUIKO channel penstocks require very little attention, as greasing is not required in most cases, and the construction of the penstock gate is self-aligning, with no fiddly wedges, and an integrated EPDM seal. The Channel Penstock is available as standard with either a single, central spindle or twin spindles to prevent crabbing or to reduce snagging of floating debris. In both cases, this can be replaced with rising spindles, rack and pinion drives, or hydraulics, and in all cases, the equipment can be manually driven, or electrically operated, along with automation if desired. AQUIKO Channel Penstocks are built to match our customers specification. Please fill in the form with your requirements and we will get back to you. -
AQUIKO Weir Penstocks are an ideal way to accurately control water levels, adjust flow rates, or even divert floating debris/scum away from operational equipment. The penstocks are manufactured in Stainless Steel 316L, making them lightweight for ease of handling and installation, without compromising strength. The AQUIKO Weir Penstock comprises a sluice gate that moves vertically, adjusting the height of its weir crest to allow the water level upstream to be maintained. Weir penstocks are wall-mounted, with no requirement for grouting, making them quick and simple to install. Once installed, AQUIKO Weir Penstocks require very little attention, as greasing is not required in most cases, and the construction of the penstock gate is self aligning, with no fiddly wedges, and an integrated EPDM seal. The weir penstock is available as standard with either a single, central spindle or twin spindles to prevent crabbing or to reduce snagging of floating debris. Although the spindle is centrally positioned, it has a unique drive arrangement to prevent collision with debris. In both cases, this can be replaced with rising spindles, rack and pinion drives, or hydraulics, and in all cases, the equipment can be manually driven, or electrically operated, along with automation if desired. AQUIKO Weir Penstocks are built to match our customers specification. Please fill in the form with your requirements and we will get back to you. -
400mm Hand Wheel for use in operating AQUIKO Penstocks -
Wall Mounted Pedestal for use with AQUIKO Penstocks -
1m T-Key for use in operating AQUIKO Penstocks -
Spindle kit for use with AQUIKO Penstocks
Same day dispatch 
Sustainable Solutions 
Expert service
01777819734info@aquiko.co.uk
Same day dispatch
Sustainable Solutions
Expert service
Quick Links
Help
Social
Quick Links
Help
Social
© Copyright 2012 – 2021 | Privacy Policy | Made with by 
Envious Digital
